Hi There

I have ActiveSMS 5.0 basic installed. I also have a Nokia 6310i connected via a data cable. Everything seems to have installed OK, however, when I run the test in the set-up wizard, I get the following...

22/04/08 13:12:54 - PE: Informational - Connecting to Handset on COM1....
22/04/08 13:12:54 - PE: Informational - Settings: baud=19200 parity=N data=8 stop=1
22/04/08 13:12:54 - PE: Pass - Connected OK
22/04/08 13:12:54 - PE: Informational - Resetting modem...
22/04/08 13:13:05 - TX: ATE1<CR>
22/04/08 13:13:35 - TX: AT+CG
22/04/08 13:13:35 - TX: MI<CR>
22/04/08 13:13:45 - TR: Device:
22/04/08 13:13:45 - TR: Using Default device settings
22/04/08 13:13:45 - EX: Comms Exception raised<LF>Function: CATDevice::IdentifyDevice<LF>Description: Invalid AT+CMGI response ()<LF>HResult: -2147467259
22/04/08 13:13:45 - TX: AT&F<CR>
22/04/08 13:14:15 - TX: AT<CR>
22/04/08 13:14:45 - EX: Comms Exception raised<LF>Function: CATDevice::ResetConnection<LF>Description: Invalid AT response ()<LF>HResult: -2147467259
22/04/08 13:14:45 - PE: Pass - Reset complete
22/04/08 13:14:45 - PE: Informational - Sending AT command...
22/04/08 13:14:45 - TX: AT<CR>
22/04/08 13:15:15 - EX: Comms Exception raised<LF>Function: CATDevice::TestConnection<LF>Description: Invalid AT response ()<LF>HResult: -2147467259
22/04/08 13:15:15 - TX: AT<CR>
22/04/08 13:15:45 - EX: Comms Exception raised<LF>Function: CATDevice::TestConnection<LF>Description: Invalid AT response ()<LF>HResult: -2147467259
22/04/08 13:15:45 - EX: Comms Exception raised<LF>Function: CActiveSMSTransportTestDlg::RunTestThreadFunc<LF>Description: Invalid AT response ()<LF>HResult: -2147467259
22/04/08 13:15:45 - PE: Error - Invalid AT response ()

I've tried this with several different baud rates, always with the same response.

I've tried using TerraTerm to connect to the device, this just responds with a blank terminal window, in which I cannot type anything.

In the Windows Event Log (Application,) the following is repeated multiple times...

Comms Exception raised
Function: IdentifyDevice
Description: Invalid AT+CMGI response ()
HResult: -2147467259

Any assistance would be greatly appreciated...

Many thanks

Stephen

Hi Stephen,

Are you using a genuine Nokia DLR-3P RS-232 Cable?

Please note most non0Nokia cables will not work with ActiveSMS